416 Profile for MKH50
Enjoy this EQ profile that allows a Sennheiser MKH-50 Suercardioid Mic to emulate or closer match a Sennheiser MKH-416 Shotgun Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-416 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-416 due to so many physical differences and variables such as the massive differences between a shotgun and a supercardioid mic, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Sennheiser MKH-50 Supercardioid Mic
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS 416 Profile for MKH50.ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS 416 Profile for MKH50.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here:
Enjoy this EQ profile that allows a Sennheiser MKH-50 Suercardioid Mic to emulate or closer match a Sennheiser MKH-416 Shotgun Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-416 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-416 due to so many physical differences and variables such as the massive differences between a shotgun and a supercardioid mic, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Sennheiser MKH-50 Supercardioid Mic
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS 416 Profile for MKH50.ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS 416 Profile for MKH50.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here:
Enjoy this EQ profile that allows a Sennheiser MKH-50 Suercardioid Mic to emulate or closer match a Sennheiser MKH-416 Shotgun Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-416 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-416 due to so many physical differences and variables such as the massive differences between a shotgun and a supercardioid mic, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Sennheiser MKH-50 Supercardioid Mic
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS 416 Profile for MKH50.ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS 416 Profile for MKH50.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here: