Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Enjoy this EQ profile that allows your Slate ML-2 mic to get incredibly close to a genuine vintage Neumann KM84i from 1984 WITHOUT using any of Slate’s software. Using precise custom full range microphone test tones and Fab Filter Pro-Q 4’s unparalleled EQ-Match engine, this preset gets closer to the sound of the vintage KM84 than I thought possible.
This emulation was created in 96kHz using a genuine vintage Neumann KM84i (from 1984) and cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors and subwoofer.
Of course, it is impossible to 100% clone the Neumann KM84i due to physical differences and variables (Slate’s ML-2 1st Gen is harder to work with), but Pro-Q 4 get’s it very close. The Slate ML-2 did very well at transforming to the KM84 with EQ alone. Your mileage may vary.
Requirements:
Slate ML-2
Fab Filter Pro-Q 4 Plugin
To load this preset in PRO-Q 4:
-Download the "TPS KM84 Profile for ML-2.ffp" preset and take note of where you've saved it
-Launch the PRO-Q 4 plugin inside your favourite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 4
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS KM84 Profile for ML-2.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 4 here:
Enjoy this EQ profile that allows your Slate ML-2 mic to get incredibly close to a genuine vintage Neumann KM84i from 1984 WITHOUT using any of Slate’s software. Using precise custom full range microphone test tones and Fab Filter Pro-Q 4’s unparalleled EQ-Match engine, this preset gets closer to the sound of the vintage KM84 than I thought possible.
This emulation was created in 96kHz using a genuine vintage Neumann KM84i (from 1984) and cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors and subwoofer.
Of course, it is impossible to 100% clone the Neumann KM84i due to physical differences and variables (Slate’s ML-2 1st Gen is harder to work with), but Pro-Q 4 get’s it very close. The Slate ML-2 did very well at transforming to the KM84 with EQ alone. Your mileage may vary.
Requirements:
Slate ML-2
Fab Filter Pro-Q 4 Plugin
To load this preset in PRO-Q 4:
-Download the "TPS KM84 Profile for ML-2.ffp" preset and take note of where you've saved it
-Launch the PRO-Q 4 plugin inside your favourite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 4
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS KM84 Profile for ML-2.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 4 here: